- 16-LED
- 4"x 2" Sealed Marker Light
- Built-in 2-wire pigtail
- 3" Hole mount centers
|
- 10-LED
- 2" Rnd Sealed Marker Light
- Uses GP1 standard 2-wire plug and G2G rubber grommet
|
- 13-LED
- 2.5" Rnd Sealed Marker Light
- Uses GP1 standard 2-wire plug and G25G rubber grommet
|
- 2-diode LED Red
- 3-diode LED Amber
- 2.5" x 1.25" Sealed Marker Light
- Uses G26B-C Chrome (wired) mounting bracket
|
- 3.75" x 1.25" Sealed Light
- 4-LED Red or Amber
- 6-LED Split color Red/Amber
- Uses G3B Chrome or Black mounting bracket
|
- 4-LED
- 4" x 2" Oblong Clearance/Side Marker light with Reflex
- Built-in 2-wire pigtail
|
- 6-LED
- 2-7/8" x 2-1/8 Stud Mount Side Marker Light w/Reflex
- Built-in 2-wire pigtail
|
- 3/4" Single Diode LED light
- Uses CPL1-Bezel
|
- 52-LED
- 5.5" Sealed Rectangular
- Polycarbonate Lens
- Uses GP2 3-wire plug and G55G 5.5" rubber grommet
|
- 10-LED
- 4" Sealed Round Light
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G4G Rubber Grommet
|
- 18-LED
- 4" Sealed Round Light
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G4G Rubber Grommet
|
- 24-LED
- 4" Sealed Round Light w/Mirror Finish
- Amber acts as turn signal
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G4G Rubber Grommet
|
- 10-diode LED light
- 6.5" Sealed Oval
- Amber turn signal light
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G65G Rubber Grommet
|
- 20-LED
- 6.5" Sealed Oval
- Amber turn signal light
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G65G Rubber Grommet
|
- 24-LED
- 6.5" Sealed Oval light w/Mirror Finish
- Amber turn signal light
- Red stop/tail/turn light
- Uses GP2 3-Wire Plug and G65G Rubber Grommet
|
- 6.5" Sealed Oval
- Amber Sequencing Turn Signal Light
- Dual function - either trailing arrow or sequencing single arrow
- Comes with GP3 Plug
- Uses G65G rubber grommet
|
- 18-LED
- 6.5" Amber Side Marker & Turn Light
- Uses Standard GP2 3-Wire Plug and G65G Rubber Grommet
|
- 3-LED Clearance Marker/Interior/Utility Light
- High Impact Acrylic Lens
- ABS Chrome-plated bracket
- 2-3/4" Center to Center holes for mounting
- No plug needed, includes 2-Wire Pigtail
|
- 4-LED Clearance Marker Light with Chrome Bezel
- Built-in 2-Wire Pigtail
|
- 34 Diodes (17 per side)
- 4" LED Pedestal Light
- Chrome Die Cast Housing
|
- 4-5/8" Square LED Light
- 25 Red LEDs, 25 Amber LEDs & 2 Amber LED Side Markers per Light
- Single Stud Pedestal Light
|
- 4" Round Quad Flash Kit
- Self-contained Flash Unit
- Strobe Kit Includes 2 Lights, Grommets and Plugs
|
- 6.5" Quad Flash Kit
- Self-contained Flash Unit
- Strobe Kit Includes 2 Lights, Grommets and Plugs
|
- 4-5/8" Square LED Light
- 25 Red LEDs, 25 Amber LEDs & 2 Amber LED Side Markers per Light
- Double Stud Pedestal Light
|
- 10-LED
- 4" Round Sealed Stop/Turn/Tail Light
- Flange Mount Design
- Chrome Bezel
- Acrylic Lens and ABS Housing and Flange
- Comes with Built-in Pigtail and Hardware
|
- 10 PCs square LEDs
- Oval Sealed Stop/Turn/Tail Light
- Flush Mount Design
- Acrylic Lens, ABS Housing and Flange and Chrome Bezel
- Built-in Pigtail
- Comes with Hardware
|
- 10-LED Clear Light
- 6.5" Oval Utility Light
- Surface Mount Design
- Comes with Chrome Bezel
- Built-in Pigtail
|
- 17" Identification LED Light Bar
- 2.5" Lights
- Mounts on 16" Center
|
- Low Profile Sealed LED Bar
- CPL9451 - Red Stop/Turn/Tail Light
- CPL9463 - Red ID Lamp and AUX High Mount Stop with Reflex for Vehicles over 80" Wide
- CPL 9458 - Yellow ID Lamp with Reflex
|
|
|
